beautypg.com

2 oem selectable features, Oem selectable features, Datasheet – SMSC USB2640i User Manual

Page 9: Flash media controller

background image

Ultra Fast USB 2.0 Multi-Format Flash Media Controller/USB Hub Combo

SMSC USB2640/USB2641

9

Revision 2.0 (10-03-08)

DATASHEET

1.2

OEM Selectable Features

Hub

A default configuration is available in the USB2640/USB2641 following a reset. The
USB2640/USB2641 may also be configured by an external I

2

C EEPROM or via external SPI flash.

The USB2640/USB2641 supports several OEM selectable features:

„

Compound device support (port is permanently hardwired to a downstream USB peripheral device),
on a port-by-port basis.

„

Select over-current sensing and port power control on an individual (port-by-port) or ganged (all
ports together) basis to match the OEM’s choice of circuit board component selection.

„

Port power control and over-current detection/delay features

„

Configure the delay time for filtering the over-current sense inputs.

„

Configure the delay time for turning on downstream port power.

„

Bus- or self-powered selection

„

Hub port disable or non-removable configurations

„

Port signal swapping for easier board layout

„

Flexible port mapping and disable sequence. Ports can be disabled/reordered in any sequence to
support multiple platforms with a single design. The hub will automatically reorder the remaining
ports to match the host controller's numbering scheme.

„

Programmable USB differential-pair pin location.

- Eases PCB layout by aligning USB signal lines directly to connectors

„

Programmable USB signal drive strength. Recover USB signal integrity due to compromised
system environments using 4 levels of signal drive strength.

„

Indicate the maximum current that the 2-port hub consumes from the USB upstream port.

„

Indicate the maximum current required for the hub controller.

Flash Media Controller

„

Customize vendor ID, product ID, and device ID.

„

12-hex digit (max) serial number string

„

Customizable vendor specific data by optional use of external serial EEPROM

„

28-character manufacturer ID and product string for flash media reader/writer

„

LED blink interval or duration

This manual is related to the following products: