beautypg.com

Datasheet – SMSC USB2640i User Manual

Page 35

background image

Ultra Fast USB 2.0 Multi-Format Flash Media Controller/USB Hub Combo

SMSC USB2640/USB2641

35

Revision 2.0 (10-03-08)

DATASHEET

7.3.3.6

CEh-D2h: Inquiry Product String

7.3.3.7

D3h: Dynamic Number of Luns

7.3.3.8

D4h-D7h: Lun to Device Mapping

BYTE

NUMBER

BYTE NAME

UINT

DESCRIPTION

4:0

INQ_PRD_STR

2640

If bit 4 of the 1st attribute byte is set, the device will

use these strings in response to a USB inquiry

command, instead of the USB Descriptor

Manufacturer and Product ID Strings.

BIT

NUMBER

BYTE NAME

UCHAR

DESCRIPTION

7:0

DYN_NUM_LUN

FFh

These bytes are used to specify the number of LUNs

the device exposes to the host. These bytes are also

used for icon sharing by assigning more than one

LUN to a single icon. This is used in applications

where the device utilizes a combo socket and the

OEM wishes to have only a single icon displayed for

one or more interfaces.

If this field is set to "FF", the program assumes that

you are using the default value of "04" and will

display icons for xD, MS, and SD/MMC. If this field

is any other value besides "FF", you must specify the

LUN# assignments in the boxes starting with LUN 00

and going to (# of Icons to Display -1).

Regardless of this setting, the USB2640/USB2641

sets this value to ‘1’.

BYTE

NUMBER

BYTE NAME

UCHARS

DESCRIPTION

3:0

LUN_DEV_MAP

FFh, FFh, FFh, FFh

These bytes are used to specify the number of LUNs

the device exposes to the host. These bytes are also

used for icon sharing by assigning more than one

LUN to a single icon. This is used in applications

where the device utilizes a combo socket and the

OEM wishes to have only a single icon displayed for

one or more interfaces.

If this field is set to "FF", the program assumes that

you are using the default value of "04" and will

display icons for xD, MS, and SD/MMC. If this field

is any other value besides "FF", you must specify

the LUN# assignments in the boxes starting with

LUN 00 and going to (# of Icons to Display -1).

Regardless of this setting, the USB2640/USB2641

sets these values to ‘FFh, 00h, 00h, 00h’.

This manual is related to the following products: