4 alarm output, 5 audio event – Siemens CCMX1315-LP User Manual
Page 36
Configuration
36
Siemens Building Technologies
Fire Safety & Security Products
01.2009
7.4.4
Alarm output
z
Alarm mode:
The alarm output can be turned OFF or be activated when any of the following
events occurs:
–
B/W: when the camera changes to monochrome
–
Event: Once alarm input1 or alarm input 2 or motion is triggered, the alarm out
will be triggered immediately as well.
z
Output hold time:
Set a time to hold alarm output. Choose either 0, 5, 10, 15, or 30 seconds. This
function is used when connecting to alarm output terminals and activating a
siren, buzzer or emergency light.
7.4.5
Audio Event
You can choose which audio *.wav file you want to upload as a voice alarm
message to the SD card from your PC. There are 4 audio events available for
upload. You can select in the appropriate menu which audio event is to be played
with which event (Motion or Alarm input 1).