Japan Tiger 7100e+ - Manual (Page 68)

Fast Ethernet 7100e+ 68
Printing
1. Log into the Fast EtherNet.
When printing with ftp, you can use any values for
“Name” and “Pass-word”. However, if the user name is
“root”, the “Password” set under TELNET or the utility
(see “Using telnet” in Chapter 7) will be required..
Example: Logging in the Fast EtherNet with a host name “OP8c”
(or an IP address “192.168.20.127”).
#ftp OP8c (or ftp 192.168.20.127)
Connected to OP8c
220 Fast EtherNet 7100e+ Ver 1.0.0 FTP server
Name (OP8c:root) : root
331 Password required.
Password:
230 User Logged in
ftp>
2. Move to the transfer directory using the cd command.
In the Fast EtherNet the transfer directory has a
hierarchical structure. Please make sure to move to
the transfer directory. It is not possible to output the
print data to the root directory.
Example: Moving to the lp directory and confirming the current
directory.
ftp>cd /lp
250 Command OK.
ftp>pwd
257”/lp” is current directory
ftp>
7100e+.p65 25/08/99, 20:50 PM 68