English – Japan Tiger 7100e+ User Manual

Page 105

User Manual

105

English

Remote Printer Mode

Configuring for the remote printer mode

Printer Name for R-Printer Mode

In the remote printer mode, type in the “Printer name” recorded in print server.
Make sure that it is consistent with the printer name recorded in the print server.
The printer name can be up to 31 alphanumeric characters long.

Job Timeout

In the remote printer mode, the time period which lapses
between the reception of the last printing until the job is
completed and the port of the Fast EtherNet released . If the
value set is too short, if the packet is transmitted late printing
may be disrupted. If the value is too high, it affects jobs of
other protocols. Normally use the default. The value set is
between 4 and 255 seconds.

PrintServer Name

In the remote printer mode, type in the “Print server name”
which manages the printer. Up to 8 print servers can be set.
The print server name can be up to 31 alphanumeric characters
long.

NetBEUI Settings

Configuring the NetBEUI protocol

Computer Name

Type in the computer name of the Fast
EtherNet. The computer name can be
up to 15 alphanumeric characters
long.

Workgroup Name

Type in the work group name. The work
group name can be up to 15 alphanumeric
characters long.