English – Japan Tiger 7100e+ User Manual
Page 121

User Manual
121
English
1
Set whether TCP/IP is used.
2
Enter the IP Address in the format: “###.###.###.###”.
3
Check the boxes if the address is to be acquired from RARP
or DHCP/ BOOTP.
4
Enter the subnet mask in the format: “###.###.###.###”.
5
Enter the gateway address in the format: “###.###.###.###”.
If you do not use a router or gateway, enter “0.0.0.0”.
6
Enter the ROOT Password.
NetWare setup screen
TCP/IP setup screen
Enter the printer name, frame type, operating mode, NetWare
port name, etc.
7100e+.p65
25/08/99, 20:54 PM
121