Japan Tiger 7100e+ - Manual (Page 63)

User Manual 63
English
4. Register the host which was registered in Procedure 2 as the
print server.
Example: In he case that “OP8c” is registered as the print
server
1. Add the print server
# ruser –a –p OP8c
2. Activate the remote perinter daemon
# startsrc –s lpd
# mkitab ‘lpd:2:once:startsrc –s lpd’
5. Add the print queue using the smit command
1. Activate the smit command and convert to the item “Add
print queue”
# smit mkrque
2. Select “remote” (the printer connected to the remote
host) from “Type of connection”.
3. Select “Standard procedure” from “Type of remote
print”.
4. Set the following items in “Add a standard remote print
queue” (change configuration other than those
indicated below according to the utilization
environment)
Example: To set the direct output port “lp” with the print
queue “OP8c_lp” and the print server “OP8c”
Queue to be added “OP8c_lp”
Host name of the remote server “OP8c”
Queue name of the remote server “lp”
Type of print spooler of the
remote server “BSD”
Description of printer name
of the remote server “Optional
comment”
7100e+.p65 25/08/99, 20:50 PM 63