Japan Tiger 7100e+ - Manual (Page 138)

Fast Ethernet 7100e+ 138
EtherTalk setup screen Printer port setup screen
1 Set whether EtherTalk is used.
2 If you want to move your printer to a different zone, enter
the new zone name.
3 Enter a new printer name to change the printer name used by
Chooser.
1 This is the character string transmitted to the printer before
and after sending print data to the direct the output port (lp).
2 This is the character string transmitted to the printer before
and after sending print data to the output port via a Kanji
filter (sjis or euc).
3 Fixed as PS
4 Enter the tab size, page width and page length for the output
port via a Kanji filter (sjis or euc).
[Kanji Conversion Output Settings] are available
only for postscript printers.
5 Set whether a banner page is printed. This item is valid only
for TCP/IP protocol.
7100e+.p65 25/08/99, 20:55 PM 138