Japan Tiger 7100e+ - Manual (Page 136)

Fast Ethernet 7100e+ 136
1 Set whether TCP/IP is used.
2 Enter the IP address in the format: “###.###.###.###”.
3 Check here if IP address is to be acquired from RARP or
DHCP/ BOOTP.
4 Enter the subnet mask in the format: “###.###.###.###”.
5 Enter the gateway address in the format: “###.###.###.###”.
If you do not use a router or gateway, enter “0.0.0.0”.
6 Enter the ROOT password.
SNMP setup screen TCP/IP setup screen
1 Enter the authentic community name and trap community
name.
2 Enter IP address for trap address as “###.###.###.###”. If
you do not use traps, enter “0.0.0.0”.
3 Enter SysContact, SysName and SysLocation.
4 This is the IP packet TTL value. This should not normally
be changed.
5 Check this option if a trap is to be issued in cases of
authorisation error.
7100e+.p65 25/08/99, 20:55 PM 136