Japan Tiger 7100e+ - Manual (Page 122)

Fast Ethernet 7100e+ 122
1 Set whether EtherTalk is used.
2 Enter the new printer name if you change the printer name
used by Chooser.
3 Enter the new zone name if you want to move your printer to
a different zone.
1 Enter the authentic community name and trap community
name.
2 Enter the IP address for trap notice as “###.###.###.###”. If
you do not use traps, enter “0.0.0.0”.
3 Enter SysContact, SysName and SysLocation.
4 This is the IP packet TTL value. This should not normally
be changed.
5 Check box if a trap should be issued when an authorization
error occurs.
EtherTalk setup screen SNMP setup screen
7100e+.p65 25/08/99, 20:54 PM 122