JVC SP-THS55F - Manual (Page 74)

Filename [TH-R1R3EU_10Subsidiary.fm]
Masterpage:Left0
Page 71Monday, 28 March 2005 21:23
71
SYSTEM CONNECTIONS
Simple Connections
This is an example of a simple connection if your TV has one
21-pin AV input (SCART) connector.
Connect the satellite receiver to the [L-2 INPUT/DECODER]
connector, then connect the [L-1 INPUT/OUTPUT] connector to
the TV’s connector.
NOTES:
● Set AL-2 SELECTB to AVIDEO/RGBB or AS-VIDEO/RGBB.
(A pg. 70)
● You can use the Automatic Satellite Programme Recording
function with this connection. (A pg. 54)
● To record a programme via the satellite receiver, select L-2 mode
by pressing PR +/– so that
AL-2B appears on the front display
panel.
● For details, refer to the instruction manual of the satellite receiver.
Perfect Connections (Recommended)
This is an example of recommended connections if your TV
has two 21-pin AV input (SCART) connectors.
Connect the decoder to the satellite receiver’s connector if you
have a decoder, [L-1 INPUT/OUTPUT] connector to TV’s
connector, and [L-2 INPUT/DECODER] connector to the satellite
receiver’s connector. Then connect the satellite receiver and TV.
The [L-2 INPUT/DECODER] connector can be used as an input
connector for an external decoder (descrambler). Simply connect a
decoder and you can enjoy a variety of programming that is
available through scrambled channels.
1
Set AL-2 SELECTB to ADECODERB. (A pg. 70)
2
Connect your unit’s [L-2 INPUT/DECODER] connector to the
decoder’s 21-pin SCART connector using a 21-pin SCART
cable.
3
Perform the procedures as described in AWhen Receiving A
Scrambled Broadcast B (A pg. 81).
Connecting To A Satellite Receiver
IMPORTANT
When you set
AL-2 SELECTB to ASAT VIDEO/RGBB or ASAT S-
VIDEO/RGB B (A pg. 70), it is possible to view a satellite
broadcast with the TV set to an input mode such as EXT1 even if
the unit is turned off. When the unit is in Stop mode or recording,
press TV/VIDEO on the remote control to turn off the Video
indicator on the front display panel.
● If you turn on the unit when the satellite receiver’s power is off,
nothing appears on the TV screen. In this case, turn on the
satellite receiver, or set the TV to its TV mode, or press TV/
VIDEO on the remote control to set the unit to the AV mode.
Outdoor unit
Satellite cable
Satellite receiver
Aerial
TV aerial cable
ANTENNA OUT
ANTENNA IN
TV
Rear of unit
[L-1 INPUT/OUTPUT]
[L-2 INPUT/
DECODER]
Connecting/Using A Decoder
Outdoor unit
Satellite cable
Satellite receiver
Aerial
TV aerial cable
TV
Decoder
ANTENNA OUT
ANTENNA IN
Rear of unit
[L-1 INPUT/OUTPUT]
[L-2 INPUT/
DECODER]
TV
TV aerial cable
[L-1 INPUT/OUTPUT]
[L-2 INPUT/
DECODER]
Decoder
Rear of unit
TH-R1R3EU_00.book Page 71 Monday, March 28, 2005 9:23 PM