JVC DLA-M5000SCU - Manual (Page 64)

64
Specifications
Optical mechanism system
• Projection method 3D-ILA device, 1 lens, 3 primary color optical shutter method
• D-ILA device 0.9" measured diagonally (1365 pixels × 1024 pixels) × 3 (Total number of pixels : 4,193,280)
• Projecting lens GL-M4023SZ 3:1~7:1 zoom lens
(separately available) GL-M4015S 1.5:1 fixed focus lens
• Screen size 60" to 300" [recommended] to 600" [maximum] measured diagonally (*with aspect ratio : 4 : 3)
• Light-source lamp 1.6 kW xenon lamp
Electrical system
• Color system NTSC, NTSC 4.43, PAL, SECAM (* Automatic switching / manual switching)
• Resolution 1365 dots
×
1024 dots (*S-XGA full resolution, during RGB input)
1000TV lines (*Horizontal resolution, aspect ratio 4 : 3, during video input)
• Scanning frequency Horizontal frequency : 15 kHz ~ 82 kHz
Vertical frequency : 50 Hz ~ 78 Hz
Input / output
[EXT. IN (AV IN input)] * The Y/C (S-video) and VIDEO (composite video) signals can be input with the video board
installed.
• Y/C 1-line, mini-DIN 4 pin × 1 (* With the video board, separately available, installed)
Y (luminance signal) : 1V(p-p), 75 Ω (negative sync)
C (chroma signal) : 0.286V(p-p) (burst signal), 75 Ω [NTSC]
: 0.3V(p-p) (burst signal), 75 Ω [PAL]
• VIDEO 1-line, BNC × 1 (* With the video board, separately available, installed)
Composite video signal : 1V(p-p), 75 Ω (negative sync)
• Y, P
B
/B-Y, P
R
/R-Y 1-line, BNC × 3
Component (Y,B-Y,R-Y) signals
Y : 1V(p-p), 75 Ω (negative sync or 3-value sync)
P
B
/B-Y : 0.7V(p-p), 75 Ω
P
R
/R-Y : 0.7V(p-p), 75 Ω
DTV-format signals
[480i (ITU-R BT. 601-4), 480p (SMPTE 293M)]
Y : 1V(p-p), 75 Ω (negative sync)
P B , P R : 0.7V(p-p), 75
Ω
[720p (SMPTE 296M), 1080i (SMPTE 274M)]
Y : 1V(p-p), 75 Ω (3-value sync)
P B , P R : 0.7V(p-p), 75
Ω
[RGB IN (RGB input)]
• RGB IN-1 (PC) 1-line, D-sub 3-row 15 pin
×
1
Analog RGB signal
R : 0.7V(p-p), 75
Ω
B : 0.7V(p-p), 75
Ω
G : 0.7V(p-p), 75
Ω
G on Sync : 1V(p-p), 75
Ω
(negative sync)
Sync signal : 1V(p-p) to 5V(p-p), high impedance (positive/negative polarity)
* Some connected devices may not correspond to composite sync (Cs) or G on sync signal.
• RGB IN-2 1-line, BNC
×
5
Analog RGB signal
R : 0.7V(p-p), 75
Ω
B : 0.7V(p-p), 75
Ω
G : 0.7V(p-p), 75
Ω
G on sync : 1V(p-p), 75
Ω
(negative sync)
M5000LU/SCU p.64-67 01.3.5, 15:11 64