Juniper Networks T1600 - Manual (Page 52)

Table 9: Technical Documentation for Supported Routing Platforms (continued)
Description Book
Contain corrections and updates to the published JUNOScope
manual, provide information that might have been omitted from
the manual, and describe upgrade and downgrade procedures. JUNOScope Release Notes
Summarize AIS new features and guidelines, identify known and
resolved problems, provide information that might have been
omitted from the manuals, and provide initial setup, upgrade, and
downgrade procedures. AIS Release Notes
Summarize AI Scripts new features, identify known and resolved
problems, provide information that might have been omitted from
the manuals, and provide instructions for automatic and manual
installation, including deleting and rolling back. AIS AI Script Release Notes
Briefly describe Services Router features, identify known hardware
problems, and provide upgrade and downgrade instructions. J-series Services Router Release Notes
Table 10: JUNOS Software Network Operations Guides
Description Book
Describes the most basic tasks for running a network using Juniper
Networks products. Tasks include upgrading and reinstalling JUNOS
software, gathering basic system management information,
verifying your network topology, and searching log messages. Baseline
Describes tasks for monitoring interfaces. Tasks include using
loopback testing and locating alarms. Interfaces
Describes tasks for configuring, monitoring, and troubleshooting
an example MPLS network. Tasks include verifying the correct
configuration of the MPLS and RSVP protocols, displaying the status
and statistics of MPLS running on all routing platforms in the
network, and using the layered MPLS troubleshooting model to
investigate problems with an MPLS network. MPLS
Describes MPLS status and error messages that appear in the output
of the
show mpls lsp extensive command. The guide also describes
how and when to configure Constrained Shortest Path First (CSPF)
and RSVP trace options, and how to examine a CSPF or RSVP
failure in a sample network.
MPLS Log Reference
Describes operational information helpful in monitoring and
troubleshooting an MPLS network configured with fast reroute
(FRR) and load balancing. MPLS Fast Reroute
Describes tasks for monitoring M-series and T-series routing
platforms. Hardware
To configure and operate a J-series Services Router running JUNOS software with
enhanced services, you must also use the configuration statements and operational
52 ■ List of Technical Publications
T1600 Routing Node Upgrade Guide