beautypg.com

Exiting upgrade mode – Juniper Networks T1600 User Manual

Page 34

background image

DRAM 2048 MB
Memory utilization 8 percent
CPU utilization:
User 0 percent
Background 0 percent
Kernel 2 percent
Interrupt 0 percent
Idle 98 percent
Model RE-4.0
Serial ID P13004101110
Start time 2007-04-30 08:38:22 PDT
Uptime 2 days, 2 hours, 22 minutes, 43 seconds

Load averages: 1 minute 5 minute 15 minute
0.02 0.02 0.00

Exiting Upgrade Mode

Use the following commands to exit upgrade mode:

1.

Enter configuration mode.

user@host> configure

2.

Delete the

fabric upgrade-mode

statement in the configuration at the

[edit chassis]

hierarchy level.

user@host# delete chassis fabric upgrade-mode

3.

Commit the configuration:

If GRES is enabled, commit the configuration on both the master and the
backup Routing Engines:

user@host# commit synchronize

If GRES is not enabled, commit the configuration on the master Routing
Engine:

user@host# commit

4.

Exit configuration mode.

user@host# exit

34

Upgrading SIBs

T1600 Routing Node Upgrade Guide