JVC GR-DV1 - Manual (Page 53)

53
T W
VCR BRAND
NAME BUTTONS
(A) (B)
GE 1 1
9 2
9 `
9 4
MAGNAVOX 9 5
1 1
7 1
7 6
MITSUBISHI 6 7
6 8
NEC 3 7
3 8
PHILIPS 1 9
9 5
1 1
9 4
9 1
9 6
JVC A
B
C 9 1
9 6
9 3
HITACHI 6 6
6 3
VCR BRAND
NAME BUTTONS
(A) (B)
PHILIPS 1 2
3 3
SANYO 3 6
3 5
SHARP 1 5
1 `
SONY 6 5
6 `
3 9
3 1
TOSHIBA 6 9
6 1
ZENITH 1 6
RCA 9 2
9 4
6 6
6 3
9 `
PANASONIC 1 3
1 7
1 1
9 4
1 8
VCR CODE LIST
3
1
6
7 8 9 `
5
4
2
There are two types of signals:
A [ Operation Confirmation
When the VCR does not operate . . .
B [ Operation Confirmation
The following procedure explains how to set the
VCR brand.
NOTE:
Make sure the VCR’s power is off before beginning
the procedure.
1 PRESS AND HOLD SET BUTTON
Make sure the remote control is pointed at the
VCR.
2 ENTER BRAND
Press the appropriate brand setting button from
the VCR Code List.
3 RELEASE SET BUTTON
•Turn on the VCR’s power and make sure it is
operating properly.
•When the remote control’s battery expires,
reset the brand after installing a fresh battery.
Brand Setting
Before you can perform Automatic Dubbing, or control the VCR using the RM-V708U remote control, you
must set the VCR brand.
The remote control is capable of controlling basic VCR functions (PLAY, FF, REW, PAUSE, STOP). After
you’ve set the brand, point the remote at the VCR’s sensor and press the appropriate button.
*Some video decks cannot be controlled.
MBR SET
BUTTON SHIFT
BUTTON
RM-V708U
(provided)
VCR (Recording deck)