JVC Everio GZ-HD40 - Manual (Page 65)

EN
Indication Action
POWER IS OFF, OR USB
DEVICE IS UNSUPPORTED
•
Turn on the power of the connected USB device.
•
Connect the AC adapter to the DVD burner.
DVD-RW DISC HAS BEEN
ALREADY USED
•
Replace the disc of the DVD burner with another disc. (A DVD-
RW disc can be initialized.)
FINALIZATION FAILED
•
Replace the disc of the DVD burner with another disc.
INCOMPATIBLE FORMAT
•
Perform the following operations in order.
! Disconnect the external HDD from the camera, and connect it
to a PC to make sure it contains no important files.
# Connect the external HDD to the camera, and then select the
[FORMAT] from the menu. (All files on the external HDD will
be deleted.)
NO FILES
! AVCHD:
•
In the case of a still image DVD, set the mode switch to still
images.
•
In the case of a video DVD, set [STREAM FORMAT] in the
[BASIC SETTINGS] to [MPEG-2 TS].
! MPEG-2 TS:
•
In the case of a still image DVD, set the mode switch to still
images.
•
In the case of a video DVD, set [STREAM FORMAT] in the
[BASIC SETTINGS] to [AVCHD].
# mode:
•
No still images have been recorded, so set the mode switch to
videos.
INSERT DISC
•
Open the tray of the DVD burner, check and reinsert the DVD,
and close the tray.
CHANGE DISC