JVC Everio GZ-HD40 - Manual (Page 56)

EN
Y BASIC SETTINGS menus Settings: [ ] = Factory-preset
1 CLEAN-UP HDD
Writing speed to HDD tends to
become slow after long periods
of repeated use. Execute cleanup
periodically to regain the writing
speed.
Connect the AC adapter.
YES: Performs this function. Select [OK] when completed.
[NO]: Cancels this function.
NOTE
Depending on the condition of the HDD, it may take several
minutes for the cleanup process to be completed.
2 FORMAT HDD
Ensures stable speeds and
operation when accessing the hard
disk drive.
[FILE]: Initializes all files in the hard disk drive.
FILE + MANAGEMENT NO: Initializes all files and
management numbers in the hard disk drive. (Z p. 64)
NOTE
Be aware that all files and data including protected files will be
erased by the formatting process.
, FORMAT SD CARD
You have to format newly purchased
microSD cards with this camera
before using them.
This will also ensure stable speeds
and operation when accessing the
microSD card.
[FILE]: Initializes all files in the microSD card.
FILE + MANAGEMENT NO: Initializes all files and
management numbers in the microSD card. (Z p. 64)
NOTE
Be aware that all files and data including protected files will be
erased by the formatting process.
0 DELETE DATA ON HDD
When you dispose of the camera,
perform this to make it difficult to
recover data on the HDD.
Connect the AC adapter.
YES: Performs this function. Select [OK] when completed.
[NO]: Cancels this function.
NOTE
In addition to this operation, it is recommended that you use a
commercially available data erasing software to eliminate the
risk of data recovery.
- VIDEO NO. RESET*
. IMAGE NO. RESET
By resetting the file number (name),
a new folder is made. The new files
will be stored in the new folder.
It is convenient to separate the new
files from previously recorded files.
* MPEG-2 TS format only
YES: Performs this function. Select [OK] when completed.
[NO]: Cancels this function.
] REMOTE
Turns on/off reception of the
operation signal from the remote
control.
OFF: The camera does not receive the signal from the
remote control.
[ON]: Enables operation with the remote control.
\ OPERATION SOUND
Turns on/off the operation sound.
OFF: Turns off the operation sound.
[ON]: The melody sounds when operations are performed.
Changing the Menu Settings
(Continued)