Juniper Networks Juniper M-series M10i - Manual (Page 6)

Table 2: Adaptive Services PICs Software Features (continued)
6.4 Network Address Translation (NAT) for IP addresses
6.4 Port Address Translation (PAT) for port numbers
6.4 IP Security (IPSec) encryption
6.4 Active flow monitoring exports cflowd version 5 and version 8
records
8.3 Active flow monitoring exports version 9 records, based on
RFC 3954 (IP v4 templates only)
– Passive flow monitoring
– Passive flow collection
8.1 Flow-tap
– Dynamic flow capture
8.3 Real-time performance monitoring
7.3 Link services
6.4 Tunnel services:
■ IP-IP unicast tunneling
■ GRE unicast tunneling—Supports GRE fragmentation
■ Protocol Independent Multicast (PIM) sparse mode unicast
tunneling
6.4 Virtual tunnel interface for Layer 3 VPNs
6.4 Layer 2 Tunneling Protocol (L2TP)
7.3 Voice services:
■ Compressed Real-Time Transport Protocol (CRTP)
7.1 Encapsulations:
■ Multilink Frame Relay (MLFR)
■ Multilink Point-to-Point Protocol (MLPP)
6 ■ Adaptive Services II PIC
M10i Internet Router PIC Guide