Juniper Networks Juniper M-series M10i - Manual (Page 44)

Fast Ethernet PICs
Left: 4-Port Fast Ethernet PIC; Right: 8-Port Fast Ethernet PIC
Left: 12-Port Fast Ethernet PIC; Right: VHDCI to RJ-21 cable
■ JUNOS 6.1 and later Software release
■ 4 or 12 100Base-TX ports; 8 100Base-FX ports
■ Power requirement:
■ 4-port: 0.14 A @ 48 V (6.8 W)
■ 8-port: 0.26 A @ 48 V (12.5 W)
■ 12-port: 0.23 A @ 48 V (11 W)
Description
■ High-performance throughput on each port at speeds up to 100 Mbps
■ Source and destination Media Access Control (MAC) address filtering
■ RMON EtherStats packet buffering
■ 802.3 Ethernet standard compliant
■ 4-port PICs support MTUs of up to 9192 bytes; 8-port and 12-port PICs support MTUs of
up to 1532 bytes
■ 4-port PICs support 1024 802.1Q VLANs per port; 8-port and 12-port PICs support 16
802.1Q VLANs per port
Hardware features
■ Autosensing full-duplex and half-duplex modes
■ Virtual Router Redundancy Protocol (VRRP)
■ 802.1q virtual LANs (VLANs)
■ Circuit cross-connect (CCC) VLAN
Software features
44 ■ Fast Ethernet PICs
M10i Internet Router PIC Guide