Invacare BUZZ HMV - Manual (Page 33)

Part No. 1118395 33
®
Section 6 - Tiller Adjustment - includes the following:
Tiller Angle Adjustment
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure that
all attaching hardware is tightened securely - otherwise injury or damage
may result.
Before performing any maintenance, adjustment or service, turn power
OFF and remove key from ignition.
TILLER ANGLE ADJUSTMENT (FIGURE 1)
WARNING
Ensure that tiller is properly adjusted before driving the scooter.
After making ANY tiller angle adjustments and BEFORE use, the tiller
MUST be securely locked into position. Otherwise, a fall from the scooter
could occur causing bodily injury and/or damage to the scooter. Gently,
push/pull against tiller to ensure that the tiller is securely engaged into the
adjustment plate.
NOTE: The powered scooters feature an adjustable tiller. The tiller locks into a position that is most
comfortable for you. It also lets you fold down the tiller for transportation and storage.
1. Pull UP on the tiller release lever located under the RIGHT tiller handle.
2. Push/pull the tiller to the desired angle and release the tiller lever.
3. Gently, push/pull against tiller to ensure that the tiller is securely engaged into the
locking mechanism.
NOTE: The tiller is locked in position when an audible "click" is heard.
SECTION 6 TILLER ADJUSTMENT
TILLER
ADJUSTMENT
FIGURE 1 - TILLER ANGLE ADJUSTMENT
DOWN
to LOCK
UP to
UNLOCK
Tiller
RIGHT Tiller Handle
Tiller
Release
Lever