Invacare BUZZ HMV - Manual (Page 27)

Part No. 1118395 27
®
SECTION 4 SEAT ASSEMBLY
Section 4 - Seat Assembly - includes the following:
Removing/Installing the Seat
Removing/Installing the Seat Post
Adjusting Seat Height
Adjusting the Seat Depth
90º Seat Swivel Adjustment
Removing/Installing the Seat Positioning Strap
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure that
all attaching hardware is tightened securely - otherwise injury or damage
may result.
Before performing any maintenance, adjustment or service, turn power
OFF and remove key from ignition.
REMOVING/INSTALLING THE SEAT (FIGURE 1)
REMOVING
1. Fold down seat back.
2. Pulling UP on the seat lever, lift the seat assembly up and away from the seat post.
INSTALLING
1. Pulling UP on the seat lever, lower the seat assembly onto the seat post as shown in
FIGURE 1.
NOTE: If necessary, slightly twist seat assembly back and forth to lock in place.
2. Release seat lever and lift up on seat assembly to ensure the seat is secure.
SEAT
ASSEMBLY
Seat Post
FIGURE 1 - REMOVING/INSTALLING THE SEAT
Seat
Assembly
Seat Lever