Invacare BUZZ HMV - Manual (Page 29)

Part No. 1118395 29
®
SECTION 4 SEAT ASSEMBLY
SEAT
ASSEMBLY
ADJUSTING THE SEAT DEPTH (FIGURE 3)
WARNING
DO NOT adjust the seat position outside the specifications recommended
by the manufacturer.
1. Remove the seat assembly from the scooter. Refer to REMOVING/INSTALLING THE
SEAT ASSEMBLY in this section of the manual.
2. Remove the adjustable width arms. Refer to REMOVING/INSTALLING/ADJUSTING
THE ARMRESTS in SECTION 5 of this manual.
3. Remove the six (6) mounting screws located under the seat that secure the back
assembly to the seat base.
4. Adjust back assembly to one (1) of three (3) mounting positions.
5. Reinstall the six (6) mounting screws securing the back assembly to the seat base.
Securely tighten.
6. Reinstall the adjustable width arms. Refer to REMOVING/INSTALLING/ADJUSTING
THE ARMRESTS in SECTION 5 of this manual.
7. Reinstall the seat assembly onto the scooter. Refer to REMOVING/INSTALLING THE
SEAT ASSEMBLY in this section of the manual.
Seat Base
Mounting
Screws
Mounting
Holes
(Typ. Both
Sides)
FIGURE 3 - ADJUSTING THE SEAT DEPTH
Mounting Screws
Back
Assembly
Seat Base
Mounting
Holes
Back Assembly
Mounting Screws
Seat Base
Mounting
Holes
Back Assembly
Mounting Screws
Seat Base
Mounting
Holes
Back Assembly
MOUNTING POSITONS