Insignia NS-PDP42 - Manual (Page 26)

24
Insignia NS-PDP42 42" Plasma TV-720P
www.insignia-products.com
Specifications
Specifications subject to change without notice.
Programming the remote
control
You can program the provided remote control to
operate most remote controllable devices.
To find out if the remote control can operate
a device without programming:
1 Turn on the device (such as a VCR), then
press the corresponding mode button on the
remote control for the device.
2 Press POWER. If the device turns off, you do
not need to program the remote control. If the
device does not turn off, you need to program
the remote control
To program the remote control:
1 Turn on the device (such as a VCR), then
press the corresponding mode button on the
remote control for the device.
2 Press and hold MENU and MUTE at the
same time for two seconds. The button for
the currently selected device lights.
3 Press the number buttons for the appropriate
code for the device. For a list of codes, see
“Remote control codes” on page 24.
4 Press the mode button for the device. If the
device turns off, you have programmed the
remote control correctly.
5 Press MENU to store the code. The remote
control LED blinks twice, and the code is
stored.
6 Test various remote control buttons with the
device. If some of the buttons do not work
correctly, repeat this task and enter a
different code.
Remote control codes
VCRs
Unusual sounds are coming
from inside your plasma TV. • A change in humidity or
temperature may result in
unusual sounds when you
turn your plasma TV on or
off. This is normal and
does not indicate that your
plasma TV is not working
correctly.
In PC mode, the signal is out
of range. • Adjust the resolution or
the horizontal or vertical
frequency.
• Make sure that the PC is
connected correctly and
securely.
In PC mode, the picture has
vertical bars or stripes, there
is horizontal noise, or the
image position is incorrect. • Use the auto adjust feature
to automatically adjust the
image, or adjust the clock,
phase, or vertical or
horizontal position options
in the OSD.
In PC mode, the color is
unstable or there is only one
color. • Make sure that the cables
are connected correctly
and securely.
• Reinstall the PC video card
or driver.
Power requirement AC100-240 V @ 50/60 Hz
Television system NTSC-M
ATSC
64 and 256 QAM
Channel coverage VHF 2-13
UHF 14-69
CATV 1-135
DTV 2-69
CADTV 1-135
External antenna impedance 75 ohm
Temperature Operating:
32° to 104°F (0° to 40°C)
Storage:
-4° to 104°F (-20° to 60°C)
Humidity Operating: < 80%
Storage: < 85%
Dimensions (W × H × D) Including stand:
44.4 Ч 29.5 Ч 15.0 inches
(112.9 Ч 74.85 Ч 3181.0 cm)
Excluding stand:
41.3 Ч 27.4 Ч 4.1 inches
(112.9 Ч 69.5 Ч 10.37 cm)
Weight Including stand:
64.4 lbs. (29.2 kg)
Excluding stand:
55.8 lbs. (25.3 kg)
Problem Solution
Note
The provided remote control may not work with all
models or brands.
Note
If you do not enter a code within 20 seconds of
pressing MENU and MUTE, programming is
cancelled.
AIWA 034 OPTONICA 053 054
AKAI 016 043 046
124 125 146 PANASONIC 066 070 074
083 133 140
145
AMPRO 072 PENTAX 013 020 031
033 063
ANAM 031 033 103 PHILCO 031 034 067
AUDIO
DYNAMICS 012 023 039
043 PHILIPS 031 033 034
054 067 071
101
BROKSONIC 035 037 129 PILOT 101
CANON 028 031 033 PIONEER 013 021 048
CAPEHART 108 PORTLAND 108
CRAIG 003 040 135 PULSAR 072
CURTIS MATHES 031 033 041 QUARTZ 011 014