Insignia NS-PDP42 - Manual (Page 22)

20
Insignia NS-PDP42 42" Plasma TV-720P
www.insignia-products.com
Zoom 2–Extends the image vertically, and crops
the top and bottom of the image.
Selecting the on-screen display (OSD)
language
To select the OSD language:
1 Press MENU, then press or to select
OPTION. The OPTION menu opens.
2 Press , then press or to select
Language.
3 Press , then press or to select the
language you want. Your plasma TV
remembers the language you selected and
will always use that language when
displaying the OSD menus.
4 Press EXIT to return to TV viewing, or press
MENU to return to the previous menu.
Checking the DTV signal strength
If you are in DTV or CADTV mode and the
reception is poor, you can check the DTV signal
strength. If the signal strength is poor, you many
need to adjust your antenna or digital cable
input.
To check the DTV signal strength:
1 Press MENU, then press or to select
SETUP. The SETUP menu opens.
2 Press , then press or to select DTV
Signal.
3 Press EXIT to return to TV viewing, or press
MENU to return to the previous menu.
Selecting closed captions
Closed captioning information is provided by the
broadcaster. Not all programs have closed
captions.
Your plasma TV remembers which closed
caption mode you selected even if you turn off
your plasma TV.
Analog TV
To select an analog TV closed caption mode:
1 Press CCD one or more times to select the
closed caption mode you want. You can
select Off, CC1, CC2, CC3, CC4, Text1,
Text2, Text3, or Text4.
2 Press EXIT to save you selection and return
to TV viewing.
Digital TV
To select a digital TV closed caption mode:
1 Press MENU, then press or to select
OPTION. The OPTION menu opens.
2 Press , then press or to select
Caption/Text.
Note
You can also select a closed caption mode from
the
OPTION menu.