IBM VERSION 5 SY44-5902-05 User Manual

Page 204

Use this function to activate a remote service session or iSeries Operations Console.
This function activates the communications port that is used by remote service or
iSeries Operations Console.

Function 67–Disk Unit IOP Reset/Reload:

Function 67 is not available for all

system types.

This function is used to initiate an IOP dump and a disk unit IOP reset/reload.
The function is enabled only when specific SRCs are displayed on the control panel
and the associated IOP supports a reset/reload function.

Function 68–Power off Disk Unit IOP/IOA Power Domain:

Function 68 is

enabled only by specific disk-unit system reference codes (SRCs) such as disk-unit
attention SRCs.

Function 69–Power on Disk Unit IOP/IOA Power Domain:

Function 69 is

enabled when the power domain is powered off.

Function 70–Dump Service Processor Control Storage:

This function saves the

contents of the service processor control storage into nonvolatile storage for
potential use from an error log.

190

Service Functions V5R2