IBM VERSION 5 SY44-5902-05 - Manual (Page 122)

Note: If the SRC you are using occurred more than 24 hours ago, change
the “From:” and “To:” Dates and Times from the 24-hour default.
f. Use the defaults on the Select Analysis Report Options display by pressing the
Enter key.
g. Find the entry in the Product Activity Log that matches that SRC.
2. Select the Display Detail Report for Resource display. (See the example of this
display below.)
3. Press F6 to display the hexadecimal report.
The direct select address (DSA) is in the format BBBB-Cc-bb:
v BBBB = hexadecimal offsets 4C and 4D
v Cc = hexadecimal offset 51
v bb = hexadecimal offset 4F
DisplayDetail Report for Resource
Serial Resource
Name Type Model Number Name
STORAGE 6512 001 10-4294009 SI05
Log ID . . . . . . . . . : 06020132 Sequence . . . . . . . : 2248
Date . . . . . . . . . . : 05/20/95 Time . . . . . . . . . : 08:37:55
Reference code . . . . . : 3400 Secondarycode . . . . : 00000000
Table ID . . . . . . . . : 65120001 IPL source/state . . . : B/7
Class . . . . . . . . . . : Permanent
System Ref Code . . . . . : 65123400
I/O processor card detected device error
Press Enter to continue.
F3=Exit F6=Hexadecimal report
F9=Address Information F10=Previous detail report F12=Cancel
Figure 45. Example Hexadecimal Detail Report for Resource
108 Service Functions V5R2