Intel I815E - Manual (Page 43)

BIOS SETUP
I815E User’s Manual 39
Power Management Setup
The Power Management Setup allows you to save energy of your system
effectively.
CMOS Setup Utility – Copyright © 1984-2001 Award Software
Power Management Setup
ACPI Function Enabled ITEM HELP
ACPI Suspend Type (S1 (POS) Menu Level
Power Management User Define
Video Off Method DPMS
Video Off In Suspend Yes
Suspend Type Stop Grant
Modem Use IRQ 3
Suspend Mode Disabled
HDD Power Down Disabled
Soft-Off by PWR-BTTN Instant-Off
Wake-up by PCI card Disabled
Power On by Ring Disabled
Resume by Alarm Disabled
Date (of Month) Alarm 0
Time (hh:mm:ss) Alarm 0: 0: 0
** Reload Global Timer Events **
Primary IDE 0 Enabled
Primary IDE 1 Enabled
Secondary IDE 0 Enabled
Secondary IDE 1 Enabled
FDD, COM, LPT Port Enabled
PCI PIRQ[A-D] # Enabled
ACPI Function
Enable this function to support ACPI (Advance Configuration and Power
Interface).
ACPI Suspend Type
This option sets the ACPI Power Management standby state. The default
is S1 (POS).
Power Management
This field allows you to select the type of power saving management
modes. There are four selections for Power Management.
Min. Power Saving Minimum power management
Max. Power Saving Maximum power management.
User Define Each of the ranges is from 1 min. to 1hr.
Except for HDD Power Down which
ranges from 1 min. to 15 min.
(Default)