IBM HL-5250DN - Manual (Page 65)

5. Options
57
DIMM
For HL-5240/HL-5240L
The HL-5240/HL-5240L printer has 16 MB of standard memory and one slot for optional memory expansion.
You can expand the memory up to 528 MB by installing dual in-line memory modules (DIMMs).
For HL-5250DN
The HL-5250DN printer has 32 MB of standard memory and one slot for optional memory expansion. You
can expand the memory up to 544 MB by installing dual in-line memory modules (DIMMs).
DIMM types
You can install the following DIMMs:
„ 128 MB Buffalo Technology VN133-D128 / VN133-X128
„ 256 MB Buffalo Technology VN133-D256
„ 512 MB Buffalo Technology VN133-D512
„ 64 MB TechWorks 12165-0004
„ 128 MB TechWorks 12462-0001
„ 256 MB TechWorks 12485-0001
„ 512 MB TechWorks 12475-0001
Note
• For more information, visit the Buffalo Techonology site at http://www.buffalotech.com.
• For more information, visit the Techworks web site at http://www.techworks.com.
In general, the DIMM must have the following specifications:
Type: 144 pin and 64 bit output
CAS latency: 2
Clock frequency: 100 MHz or more
Capacity: 64, 128, 256 or 512 MB
Height: 31.75 mm (1.25 in.)
Dram Type: SDRAM 2 Bank
SDRAM can be used.
Note
• There might be some DIMMs that will not work with the printer.
• For more information, call the dealer you bought the printer from or Brother Customer Service.