beautypg.com

IBM 5000 User Manual

Page 79

background image

Installing Microprocessors

6. Press inward on the retainer tabs until they click into place.

Note: For the location of the retainer tabs, see the illustration in step 4b on

page 68.

7. Align the new microprocessor with the microprocessor connector on the system

board and slide it into the guides. Press the microprocessor down until it snaps
into place and is fully seated in the connector.

8. Pull outward on the retainer tabs.

9. If you replaced the microprocessor with one that has a different speed, you

must change the switch settings on the system board. To locate the switches,
see “System Board Connectors” on page 169.

Chapter 4. Installing Options

69