IBM 5000 User Manual
Page 24
Input/Output Connectors
7
Universal Serial Bus (USB) Connector 1: Attach I/O devices with universal
serial bus (USB) connectors to USB connector 1. You need a 4-pin cable to
connect a device to this port.
8
Universal Serial Bus (USB) Connector 2: Attach I/O devices with universal
serial bus (USB) connectors to USB connector 2. You need a 4-pin cable to
connect a device to this port.
9
Monitor Connector: The monitor signal cable connects here.
1
Management C Connector: The cable to attach a modem that is dedicated
to communication with the system-management processor connects here.
11
SCSI Connector: External SCSI devices attach here. For more information,
see “Connecting External Options” on page 72.
12
Parallel Connector: A signal cable for a parallel device, such as a printer,
connects here.
13
PCI Expansion Slots: Cables to the external connectors on PCI adapters
connect here (slots 3, 4, and 5).
14
PCI/ISA Expansion Slots: Cables to the external connectors on either ISA
or PCI adapters connect here (slots 1 and 2).
Chapter 1. Introducing Your Netfinity 5000
13