IBM 5000 - Manual (Page 174)

Installed Device Records
Table 14 (Page 3 of 3). Configuration/Setup Program Defaults and Changes
Option Default Value New Value Additional Information
Advanced Setup
Core Chipset Control
PCI Bus Control
Primary Bus MLT [ 30h ]
Secondary Bus MLT [ 30h ]
System SCSI Boot Precedence [ Disabled ]
Planar SCSI ChA IRQ [ Autoconfigure ]
Planar SCSI ChB IRQ [ Autoconfigure ]
Planar Ethernet IRQ [ Autoconfigure ]
Planar Video IRQ [ Autoconfigure ]
Planar USB IRQ [ Autoconfigure ]
Slot PCI Interrupt Routing
Device Enable/Disable
Planar SCSI [ Enable ]
Planar Video [ Enable ]
Planar Ethernet [ Enable ]
Slot 5 [ Enabled ]
Slot 4 [ Enabled ]
Slot 3 [ Enabled ]
Slot 2 [ Enabled ]
Slot 1 [ Enabled ]
Cache Control
Processor Cache Type [ Write-Back ]
Processor 1 Cache State [ Enabled ]
Processor 1 Cache Size 512 KB
Memory Settings [ Enabled ]
Note: The screen displays Row 0 and Row 1 for each bank. The default value for each is Enabled.
ISA I/O Recovery Timer Delay [ Full Delay ]
Svc. Processor Hardware Interrupt [ Autoconfigure ]
Plug and Play
Adapter Configuration [ Enabled ]
Memory Resources [ Plug and Play ]
I/O Port Resources [ Plug and Play ]
DMA Resources [ Plug and Play ]
Interrupt Resources [ Plug and Play ]
Note: For each of these, the screen displays a list of the resources. The default value for each is Plug and Play.
166 Netfinity 5000 Server Hardware Information and Procedures