Important – IBM Motherboard DJ800 User Manual

Page 44

D J800 M o t h e r b o a r d

B I O S S e t u p

IMPORTANT

The BIOS does NOT automatically save values that you have

modified. If you do not save your values before you exit the BIOS Setup

Utility, all your changes will be lost.

If after making and saving system changes with the BIOS Setup

Utility, you discover that your computer is no longer able to boot, the

AMIBIOS supports an override, which will reset your system to the

Failsafe defaults. If that fails, it is possible to manually clear the present

CMOS information through the “Clear CMOS Header” on the

motherboard (Refer to Jumper Settings for more information).

The best advice is to ONLY alter settings that you thoroughly

understand. The default settings have been carefully chosen by

AMIBIOS to provide the maximum system performance and reliability.

Even a slight change to the chipset setup may cause potential and un-

predictable failure to the system.

4-4