IBM Motherboard DJ800 - Manual (Page 42)

D J800 M o t h e r b o a r d
B I O S S e t u p
4-2
1. Power on the System.
Note: Normally, the only visible POST (Power On Self Test) routine
is the memory test.
2. As the memory is being tested, you can access the BIOS Setup Util-
ity by pressing the key when “Press < F2> to enter SETUP”
appears briefly at the bottom of the screen.
From the main menu of the BIOS Setup Utility, you can access the
other setup screens, such as the Security and Power menus.