IBM 9516-BXX - Manual (Page 45)

32
Intermediate Controls
Advanced Controls
Function Location
Effect of
control
Description
CLOCK
Menu 3 of 8 +........MHz......- Adjust this parameter to suppress the display of
vertical stripes.
PHASE
Menu 3 of 8 0..................23 When there are visual noises on the edges of
characters and graphics, adjust this parameter to
suppress the noise.
H-POSI
Menu 6 of 8 Moves image left or right.
V-POSI
Menu 6 of 8 Moves image up or down.
SYSTEM
RESET
Menu 7 of 8 YES / NO Use this parameter to restore all the values to the
orginal settings when the monitor was shipped.
Function Location
Effect of
control
Description
H-SIZE
Menu 6 of 8 Adjusts image width.
V-SIZE
Menu 6 of 8 Adjusts image height.
EXPAND-
SION
Menu 3 of 8 ON / OFF /
USER
To display a screen with resolution less than
1280
× 1024 (the optimum resolution of the monitor),
select the optimum size you want by specifying one
of the following :
ON: Displays a full screen. This is the normal
selection.
OFF: Displays the screen specified by your PC.
USER: Enables you to set the screen size by
specifying H-size and V-size. This setting can be
set and saved for each screen resolution.
SHARP
Menu 3 of 8 0................255 Adjust to eliminate some of the high frequency
noise in the video signal.
AUTO
DETECT
Menu 1 of 8 OFF / ON For DOS, Windows, OS/2, or AIX windows, to
enable auto setup to start automatically, specify ON.
This is the normal setting.
txteng.book Page 32 Friday, April 3, 1998 3:28 PM