IBM 9516-BXX - Manual (Page 32)

19
ENGLISH
10. Press the Setup Switch on the back of the monitor and the setup main
menu appears in front of the color-bar pattern.
11. Push one of the contrast control buttons.
12. The messages are automatically displayed in the following sequence :
‘OFF-READY- START-COMPLETED’ and auto setup is complete.
If “AUTO SETUP COMPLETED” is not displayed, or the “AUTO SETUP FAILED”
message appears, repeat the auto setup procedure several times. If auto setup
continues to fail, complete the
Manual Setup on page 28.
13. Press F3 to exit the color-bar pattern.
14. Press the Setup Switch on the back of the monitor to turn off the setup
main menu.
You have completed the monitor setup.
f the screen flickers, repeat
the setup several times until
the flicker is minimised, or adjust
it manually by following Manual
Setup on page 28.
txteng.book Page 19 Friday, April 3, 1998 3:28 PM