IBM 9516-BXX - Manual (Page 23)

10
Auto Setup for the PC
Check the operating system installed on your PC and follow the instructions
from the table below.
Before carrying out
this section it is very
important that The Monitor
Information Diskette for
Windows 95 and Windows
98 has been run. (See
page 9).
If your PC does not run
with the setup option
diskettes shipped with the
monitor, refer to Quick Setup
on page 29.
Before you begin the auto setup for your PC :
1. Make a backup copy of the setup option diskettes supplied with the
monitor.
2. Make sure the PC's video mode is set in the range of the supported
screen resolution shown in the table on page 38.
3. Perform the auto setup for each screen mode you use.
Operating System
First follow auto
setup on .... Then follow auto
set-up on ....
DOS page 11
Windows 3.1 page 11 page 12
Windows 95 page 11 page 12
Windows NT page 11 page 12
Operating System/2 (OS/2) page 11 page 13
txteng.book Page 10 Friday, April 3, 1998 3:28 PM