IBM DS8000 - Manual (Page 81)

Chapter 3. Storage system LPARs (Logical partitions) 59
Figure 3-9 Comparison with ESS Model 800 and DS8300 with and without LPAR
3.6 Summary
The DS8000 series delivers the first use of the POWER5 processor IBM Virtualization Engine
logical partitioning capability. This storage system LPAR technology is designed to enable the
creation of two completely separate storage systems, which can run the same or different
versions of the licensed internal code. The storage facility images can be used for production,
test, or other unique storage environments, and they operate within a single physical
enclosure. Each storage facility image can be established to support the specific performance
requirements of a different, heterogeneous workload. The DS8000 series robust partitioning
implementation helps to isolate and protect the storage facility images. These storage system
LPAR capabilities are designed to help simplify systems by maximizing management
efficiency, cost effectiveness, and flexibility.
256
512
2K
8K
509
63.75K
63.75K
63.75K
255
DS8300
256 128 Max Path Groups/CU Image
512 256 Max Logical Paths/CU Image
2K 256 Max Logical Paths/FC Port
16K 512 Max N-Port Logins
509 128 Max N-Port Logins/Port
127.5K 4K Max Logical FB Devices
127.5K 4K Max Logical CKD Devices
127.5K 8K Max Logical Devices
510 32 Max Logical Subsystems
DS8300 with LPAR ESS 800
256
512
2K
8K
509
63.75K
63.75K
63.75K
255
DS8300
256 128 Max Path Groups/CU Image
512 256 Max Logical Paths/CU Image
2K 256 Max Logical Paths/FC Port
16K 512 Max N-Port Logins
509 128 Max N-Port Logins/Port
127.5K 4K Max Logical FB Devices
127.5K 4K Max Logical CKD Devices
127.5K 8K Max Logical Devices
510 32 Max Logical Subsystems
DS8300 with LPAR ESS 800
DS8300 addressing capabilities