beautypg.com

5 network and san requirements, 1 s-hmc network requirements – IBM DS8000 User Manual

Page 175

background image

Chapter 8. Installation planning

153

CNT (INRANGE):

http://www.cnt.com/ibm/

McDATA:

http://www.mcdata.com/ibm/

Cisco:

http://www.cisco.com/go/ibm/storage

Channel extension technology products

Channel extension technology product vendor documentation and Web pages should be
reviewed to obtain information regarding configuration planning, hardware and software
requirements, firmware and driver levels, and release notes.

Cisco:

http://www.cisco.com/go/ibm/storage

CIENA:

http://www.ciena.com/products/transport/shorthaul/cn2000/index.asp

CNT:

http://www.cnt.com/ibm/

Nortel:

http://www.nortelnetworks.com/

ADVA:

http://www.advaoptical.com/

8.5 Network and SAN requirements

Your DS8000 storage units must be placed in a location that meets the network and
communications requirements.

You should keep in mind the following network and communications issues when you plan the
location and interoperability of your storage units:

Storage Hardware Management Console network requirements

Remote support connection requirements

Remote power control requirements

SAN considerations

8.5.1 S-HMC network requirements

Generally, each S-HMC requires a dedicated connection to the network. See 9.2, “Storage
Hardware Management Console (S-HMC)” on page 158
.