ICP DAS USA DB25 - Manual (Page 40)

DeviceNet to Motor Drives
34
Use Output Word xx
If you want to map this word of Output data to a motor drive parameter, select this option. If this option
is not selected, any data appearing in this Output word will be ignored.
Motor Drive Address
This is the Address of the Motor Drive mapped to this word of Output data. The Motor Drive Address
must be in the range 0 to 255.
Parameter Number
This is the Parameter Number of the Motor Drive mapped to this word of Output data. Whenever the
value in this Output word changes, the DN-3000 will write that value to the motor drive parameter
specified by the Motor Drive Address and Parameter Number.