ICP DAS USA DB25 - Manual (Page 25)

DeviceNet to PLCs or Devices
19
Use Output Word xx
If you want to map this word of Output data to a PLC/Device register, select this option. If this option is
not selected, any data appearing in this Output word will be ignored.
PLC/Device Address
This is the Address of the PLC/Device mapped to this word of Output data. The PLC/Device Address
must be in the range 0 to 255.
File Number (Allen-Bradley PLCs only)
This is the File Number of the register in the PLC mapped to this word of Output data.
Register Number
This is the Register Number of the PLC/Device mapped to this word of Output data. Whenever the value
in this Output word changes, the DN-3000 will write that value to the register specified by the
PLC/Device Address, File Number and Register Number.