beautypg.com

Inspection/setup, Heat source fuel expands when heated – Multiquip 20 KW Standby Generator MQP20P User Manual

Page 24

background image

page 24 —MQp20p STaNDBY geNeRaTOR • OpeRaTiON aND paRTS MaNual — Rev. #1 (11/28/11)

InSPECtIOn/SEtuP

1. Place the generator level with the ground. Failure to do

so will cause fuel to spill from the tank before reaching

full capacity (Figure 8).

Figure 8. Only Fill on Level Ground

2. Unlatch and remove the cabinet door of the generator.

Remove fuel cap and fill tank (Figure 9).

Figure 9. Fueling the Generator

Level Ground

Unlevel Ground

=

Level Ground

Unlevel Ground

DO NOT fill on

unlevel ground

!

!

70

NOTICE

ONlY use #2 diesel fuel when refueling.

DIESEL

FUEL

3. Monitor the fuel gauge while filling fuel tank. Stop filling

when the fuel gauge indicates full (Figure 10).

DO NOT

wait for fuel to rise in filler neck.

Figure 10. Full Fuel Tank

Figure 11. Fuel Expansion

1/2

E

F

CauTiON

DO NOT OveRFill fuel system. Leave room for fuel

expansion. Fuel expands when heated (Figure 11).

1/2

E

F

!

!

Heat Source

Fuel

EXPANDS

when heated

This manual is related to the following products: