Motorola C350 - Manual (Page 21)

20
Getting M
o
re Out
of Your Phone
Connect your phone to the device as described on
page 19 and do the following:
Receiving a Data or Fax Call
Use this procedure to transfer data or a fax to your
computer or hand-held device. Connect your phone to the
device as described on page 19.
Transferring the Data or Fax
Your phone notifies you when the call arrives, and
transfers the call to the connected device. Use the
application running on the device to answer the call.
Ending the Data/Fax Connection
When the data or fax transfer is complete:
Making a or Talk and Fax Call
You can place a call where you talk and then
send a fax to the same phone number within
the same call.
Connect to the device that will send the fax and do the
following:
Adjusting Network Settings
Your service provider registers your phone to a
network. You can view information about the
current network, change how your phone
searches for a network, specify your preferred
networks, and activate alerts that indicate when a call is
dropped or network registration changes.
Monitoring Battery Charge
To view a detailed battery charge meter:
Viewing Phone Specifications
To view your phone’s feature specifications:
Action To
1 Check the phone make sure that the phone is
connected and powered on
2 Open the
application on
your computer place the call through the
application (such as
dial-up-networking or fax)
Note: You cannot dial data or
fax numbers through your
phone’s keypad. You must
dial them through your
computer, unless you are
making a talk then fax call
(see page 20).
3 End the call from
the connected
device close the call and connection
when the transfer is complete
Action To
End the call from the
connected device close the connection
Press To
1 keypad keys enter the phone number
2 M open the Dialing Menu
3
S
scroll to Talk and Fax
4 SELECT ( + ) select Talk and Fax
Your selection applies to the
next call only.
5 N make the call
Speak and, when ready,
initiate the fax transfer on the
connected device. When the
transfer is complete, end the
call from the connected
device.
Find the Feature M > Settings
> Other Settings
> Network
Find the Feature M > Settings
> Phone Status
> Battery Meter
Find the Feature M > Settings
> Phone Status
> Other Information
Press To