Motorola C350 - Manual (Page 18)

17
Getting More Out of Your Phone
Using TTY Mode
You can use an optional TTY device with your
phone to send and receive calls. You must plug
the TTY device into the phone’s headset jack and
set the phone to operate in one of three TTY
modes.
Notes:
• Use a TSB-121 compliant cable (provided by the TTY
manufacturer) to connect the TTY device to your
phone.
• Set the phone volume to level 4 (middle setting) for
proper operation. If you experience a high number of
incorrect characters, adjust the volume as necessary
to minimize the error rate.
• For optimal performance, your phone should be at
least 12 inches (30 centimeters) away from the TTY
device. Placing the phone too close to the TTY device
may cause high error rates.
Setting TTY Mode
When you set your phone to a TTY mode, it operates in
that mode whenever the TTY device is connected.
The TTY Setup menu includes the following options:
When your phone is in a TTY mode, the international
TTY symbol and the mode setting are shown in the
display during an active digital TTY call. You can press
TTYMODE ( - ) to change the mode setting.
Switching to TTY Mode During a Voice Call
Returning to Voice Mode
To return to normal voice mode, select Voice from the
TTY Setup menu.
Using Fixed Dialing
When you turn on fixed dialing, users can only
call numbers stored in the fixed dial list. Use this
feature to limit outgoing calls to a predefined list
of numbers, country codes, area codes, or other
prefixes.
Turning Fixed Dial On or Off
Using the Fixed Dial List
You must turn on fixed dialing to open the fixed dial list
(see above)
You create and edit fixed dial entries just like phonebook
entries. Fixed dial entries are stored on your SIM card, and
do not have
Type , Voice Name , or Ringer ID information.
Using DTMF Tones
You can send numbers to the network as dual tone
multi-frequency (DTMF) tones during a call. Use DTMF
tones to communicate with automated systems that
require you to submit a PIN code or credit card number.
To set DTMF tones to be long, short, or off:
Short sends a short fixed-duration tone for each keypress.
Long sends each tone for as long as you depress the key.
Short DTMF tones work with most automated systems.
Some systems (such as home answering machines) may
require long tones for proper activation.
Find the Feature M > Settings
> Other Settings
> Initial Setup
> TTY Setup
Press To
1 S scroll to TTY Setup
2 CHANGE ( + ) change the TTY mode
3 S scroll to the TTY mode
4 SELECT ( + ) select the TTY mode
Setting Description
Voice Return to voice mode
TTY Transmit and receive TTY characters
VCO Receive TTY characters but transmit
by speaking into the microphone
HCO Transmit TTY characters but receive
by listening to the earpiece
v
Press To
1 M open the Call menu
2
S
scroll to TTY Setup
3 SELECT ( + ) display the TTY Setup menu
4
S
scroll to the TTY mode
5 SELECT ( + ) select the TTY mode
Find the Feature M > Settings > Security
> Fixed Dial > On or Off
Find the Feature M > Fixed Dial
Press To
M > Send Tones send a number to the
network as DTMF tones, for
credit card calling or
password entry
Find the Feature M > Settings
> Other Settings
> Initial Setup > DTMF