Middleby Cooking Systems Group PS360/PS360WB - Manual (Page 59)

4-3
SECTION 4
MAINTENANCE
The crumb pans with cutout holes (and an end shield
attached on the inner end) are used at the left end
(conveyor motor end) of an upper oven. The shield
protects the conveyor motor from heat. The crumb pans
without cutout holes are installed on a lower oven.
2. After cleaning, reinstall the crumb pans.
E. Window
1. Clean the window in place, unless it needs a
thorough cleaning, which will require removal, as follows.
2. Remove the window by opening it (into the oven
interior). Then, unscrew the window knobs from each
end (Figure 4-5).
Figure 4-5. Unscrewing a Window
Knob, Before Removal
3. Push the open window all the way inside the oven,
making sure it is clear of the frame. Now, turn the window
sideways inside the oven (Figure 4-6,) and then remove
it. This will avoid breaking the window.
Conveyor
End Stop Conveyor Extension
Conveyor
End Plug
Crumb Pan
Lift, and slide pan
toward the oven; then,
lower the pan.
Figure 4-4. Crumb Pan
Removal
Figure 4-6. Window Removal