MSI G52-MA00628 - Manual (Page 64)

Chapter 3
3-22
Wake Up On Ring, Wake Up On PME, USB Wake up from S3, PS2MS
Wakeup from S3/S4/S5
These fields specify whether the system will be awakened from power
saving modes when activity or input signal of the specified hardware
peripheral or component is detected. Settings are: Enabled and Disabled.
Note: To use the function of “Wake up on Ring”, you need to install
a modem supporting power on function.
PS2KB Wakeup From S3/S4/S5
This setting allows you to wake up the system from S3/S4/S5 states with
the options of Any Key, Hot Key and Password (max. 8 numbers).
Resume by Alarm
This function is for setting date and time for your computer to boot up.
During Disabled, you cannot use this function. During Enabled, choose
the Month, Day, and Time Alarm:
Month Alarm You can choose which month the system will boot up.
Day of Month Alarm You can choose which day of the preset month
the system will boot up. Set to 0, to boot every
day.
Time (hh:mm:ss) Alarm You can choose what hour, minute and
second the system will boot up.
Note 1: If you have change the setting, you must let the system bootup
until it goes to the operating system, before this function will work.
Note 2: Please see Table 1 for more information on the system wake-
up from S1, S3, S4, S5 state.