Mio MioMap v3.3 C320 - Manual (Page 58)

If public TMC data is broadcast at your location, MioMap will automatically take into
account the TMC information received. You do not need to set anything in the
program. The receiver will automatically search the FM radio stations for TMC data,
and the decoded information will immediately be used in route planning. The
moment MioMap receives traffic information that may affect your route, the program
will warn you that it is recalculating the route, and navigation will continue with a new
route that is optimal considering the most up-to-date traffic conditions.
The TMC subsystem can be started from the GPS Data screen (Page 34) by tapping
the TMC button.
Note: An external TMC cradle may be required to enable TMC on your device.
4.9.1 List of TMC messages
The main screen of the TMC section is the list of valid TMC messages ordered by
their distance from your current location.
Tap the arrows to turn the page, and see traffic difficulties farther away from your
current position, or press Settings to configure the TMC subsystem. This opens a
new window.
4.9.2 TMC control center
This screen shows the selected TMC source and allows you to change the TMC
settings.
58