Streets and roads – Mio MioMap v3.3 C320 User Manual
Page 19

Note: The automatic day/night mode is based upon the current date and GPS 
position by which MioMap calculates the exact sunrise and sunset times on the 
particular day at the particular location. Using that information MioMap can 
automatically switch between the color schemes a few minutes before sunrise, when 
the sky has already turned bright, and a few minutes after sunset before it gets dark. 
Tip: There are several daytime and night color schemes included with MioMap. To 
select the one that suits your needs the best, make your selection in Settings (Page 
85). 
Tip: To further enhance the effect of the night color scheme, you can instruct 
MioMap to decrease the display backlight when the night colors are used. Set the 
desired backlight levels for both daylight and night modes. Page 82. 
Note: The colors mentioned and screenshots included in this manual refer to the 
default daytime and night color schemes. They may not look the same in the 
schemes you have chosen. 
Tip: If you use MioMap after sunrise or before sunset, look for the sun in the sky in 
the map background using a flat 3D view. It is displayed at its actual position to give 
you another way to orientate, and also to provide some eye candy. 
4.2.4 Streets and roads
The similarity of MioMap to paper roadmaps is also convenient when it comes to 
streets, the most important elements of the map concerning navigation. MioMap 
uses similar color codes to those you are accustomed to, and the width of the streets 
also refers to their importance, so it will not be difficult to tell a highway from a small 
street. 
Streets and roads have names or numbers for identification. Of course, this 
information can be displayed on the map. MioMap uses two different ways to show 
street labels. The conventional way is the same as a roadmap – it displays the name 
of the street aligned with the street. The alternative is a kind of virtual signpost stuck 
into the street itself. 
You need not choose between the two modes. MioMap will use the one best for the 
current tilt and zoom level. Zoom in to have only a few streets on the map, and start 
19
