McIntosh MVP851 - Manual (Page 41)

41
How to Operate the MVP851, con’t
Figure 79
Figure 80
11. In a similar manner enter any selection additions to
the remaining six Program Lines. Refer to figure
80.
12. Start the Program Play Mode by pressing the
Right directional Push-button to highlight the
PLAY Button Icon and press the SELECT Push-
button to start the Program Playback.
Note: An entire Playback Program may be Cleared
from memory. First press the Right
directional Push-button followed by pressing
the Down
directional Push-button and select
the highlighted CLEAR ALL Button Icon, then
press the SELECT Push-button. Pressing the
Leftt directional Push-button will return to a
Program Entry Line. The Playback Program is
also Cleared when the disc is removed from the
MVP851.
13. To cancel the Program Playback, press the STOP
Push-button twice followed by pressing the PLAY
MODE Push-button twice. Then press the Right
directional Push-button followed by pressing the
Down
directional Push-button and select the
highlighted CLEAR ALL Button Icon. Finally,
press the SELECT Push-button.
14. To exit the Program Play Mode press the PLAY
MODE Push-button twice.
CD Disc Play Mode
This feature allows programming the playback of specific
Tracks on a CD Disc. It also allows for the random play-
back of all Tracks.
Note: The Programming of a CD Disc is very similar to the
Programing of a DVD-Audio Disc; refer to the previous
pages.
Program Playback of a Specific Track(s):
1. Press the PLAY MODE Push-button once to access
the Program Play Mode. Refer to figure 81 on the
next page.
Note: The Front Panel Alphanumeric Display will
indicate “P” and a flashing “1”.
2. Press the SELECT Push-button and the Program
Line 1 Track Column will be highlighted with a
flashing “1” and arrows above/below it.
3. Press the Up or Down directional Push-buttons
or use the Numbered Push-buttons to select the de-
sired Track Number on the disc.
Note: One of the choices for the Track Number is
“All”, which would include all the Tracks on a
disc. If an undesired choice has been made it
can be Cleared from memory. First press the
Right directional Push-button followed by
pressing the Down
directional Push-button
Figure 78