McIntosh MVP851 - Manual (Page 40)

40
How to Operate the MVP851, con’t
4. To cancel the Random Playback of All Groups,
press the STOP Push-button twice followed by
pressing the PLAY MODE Push-button once.
Program Playback of Specific Group(s) and/or
Track(s):
1. Press the PLAY MODE Push-button twice to ac-
cess the Program Play Mode. Refer to figure 75.
Note: The Front Panel Alphanumeric Display will
indicate “P” and a flashing “1”.
2. Press the SELECT Push-button and the Program
Line 1 “G” Group Column will be highlighted with
a flashing “1” and arrows above/below it. Refer to
figure 76.
3. Press the Up or Down directional Push-buttons
or use the Numbered Push-buttons to select the de-
sired Group Number on the disc.
Note: If an undesired choice has been made, it can be
Cleared from memory. First press the Right
directional Push-button followed by pressing the
Down
directional Push-button and select the
highlighted CLEAR Button Icon, then press the
SELECT Push-button. Pressing the Left
directional Push-button will return to a Program
Entry Line.
4. Press the SELECT Push-button to enter the Group
choice into memory and the first line “T” Track
Column will be highlighted with a flashing “1” and
arrows above/below it. Refer to figure 77.
5. Press the Up or Down directional Push-buttons
to select the desired Track Number on the disc.
Note: One of the choices for the Track Number is
“All”, which would include all the Tracks in the
Group previously selected. Refer to figure 78.
6. Press the SELECT Push-button to enter the Track
choice into memory and Program Line 2 will be
highlighted.
Note: The playback time for the First Program Line
will appear in the Time Column.
7. Press the SELECT Push-button and the second line
“G” Group Column will be highlighted with a
flashing “2” and arrows above/below it. Refer to
figure 79.
8. Press the Up or Down directional Push-buttons
to select the desired Group Number on the disc.
9. Press the SELECT Push-button to enter the Group
choice into memory and the first line “T” Track
Column will be highlighted with a flashing “1” and
arrows above/below it.
10. Press the Up or Down directional Push-but-
tons to select the desired Track Number on the
disc. Refer to figure 80.
Figure 75
Figure 76
Figure 77