Motorola MVME2400 - Manual (Page 30)

1-14 Computer Group Literature Center Web Site
Preparing and Installing the MVME2400-Series Module
1
!
Caution
Inserting or removing modules with power applied may result
in damage to module components.
!
Warning
Dangerous voltages, capable of causing death, are present in
this equipment. Use extreme caution when handling, testing,
and adjusting.
3. If the MVME240x has already been installed in a VMEbus card slot,
carefully remove it. Lay the MVME240x flat, with connectors P1
and P2 facing you.
!
Caution
Avoid touching areas of integrated circuitry; static discharge
can damage these circuits.
4. Remove the PCI filler plate from the selected PMC slot in the front
panel of the MVME240x. If installing a double-width PMC, remove
the filler plates from both PMC slots.